The two 40th Anniversary watches of the Patek Philippe Nautilus series are not too much surprise. The 5711 is made of platinum, limited to 700 pieces, the dial is marked with 40 and 1976-2016, and there is nothing else. The 5976/1G approach is also very similar, and the dial is also marked 1976-40-2016. Therefore, only during the period after the announcement, these two watches became hot topics and were constantly "fired", but they quickly became silent. Even so, they can't deny that they have a special significance as a 40th anniversary commemorative watch, and Patek Philippe chose the two models of the Nautilus Nautilus series for the 40th anniversary, which has a clear intention. In the 1970s, Swiss watchmaking suffered in the quartz crisis. In 1972, in search of a breakthrough, Audemars Piguet and the generation of master watchmaker Jero Zunda collaborated to launch the Royal Oak series of steel watch sports watches. It goes against the trend. In 1976, Patek Philippe teamed up with Master Jerome Zunda to develop the Nautilus watch, the first sports watch series that Patek Philippe has created since its inception. Its greatest significance is to make the Patek Philippe mechanical watch break free. The aesthetic and applied scope of traditional watchmaking. The Royal Oak and Nautilus are the first truly high-end watches in sports watches.Best Replica Patek Philippe Nautilus Watches with cheap price on sale.
The 5976/1G and 5980 have obvious differences. Firstly, the case diameter of the 5976/1G watch (10 o'clock to 4 o'clock) is enlarged to 44 mm, which is larger than the 40.5 mm of the 5980. In a circle, don't underestimate the increase of 3.5 mm, enough for the small wrist men to completely hold. The larger the size, the more the actual effect will be immediately increased by 1 mm. In view of the overall size increase, many details of the watch have also changed, the dial is more open, from the side of the first Nautilus watch 3700, the shoulder is also more slender. This hinged shoulder was inspired by the locking structure of the porthole on the transoceanic cruise ship, which was used to fix the upper and lower case. Now it also acts as a fixed case and is also passed as a series of features. Another significant difference between the 5976/1G and the 5980 is the timer at 6 o'clock. The 5980's timer is divided into three layers, the outermost layer is 0-30 minutes, the middle layer is 30-60 minutes, and the inner layer is 12 hours. The 5976/1G timing is also divided into three layers. The difference is that the outermost layer is the 12-hour time zone, the middle layer is 0-30 minutes, and the inner layer is the 30-60 minute time zone. Due to the overall size of the watch, although the 6 o'clock position is also a three-layered polymer type timing, the reading number can still be clear, and the 5980 needs to be distinguished by different colors and inner and outer layers according to the demand priority.We also offer replica Patek Philippe Grand Complications watches with high quality for sale.
The 5976/1G and 5980 have obvious differences. Firstly, the case diameter of the 5976/1G watch (10 o'clock to 4 o'clock) is enlarged to 44 mm, which is larger than the 40.5 mm of the 5980. In a circle, don't underestimate the increase of 3.5 mm, enough for the small wrist men to completely hold. The larger the size, the more the actual effect will be immediately increased by 1 mm. In view of the overall size increase, many details of the watch have also changed, the dial is more open, from the side of the first Nautilus watch 3700, the shoulder is also more slender. This hinged shoulder was inspired by the locking structure of the porthole on the transoceanic cruise ship, which was used to fix the upper and lower case. Now it also acts as a fixed case and is also passed as a series of features. Another significant difference between the 5976/1G and the 5980 is the timer at 6 o'clock. The 5980's timer is divided into three layers, the outermost layer is 0-30 minutes, the middle layer is 30-60 minutes, and the inner layer is 12 hours. The 5976/1G timing is also divided into three layers. The difference is that the outermost layer is the 12-hour time zone, the middle layer is 0-30 minutes, and the inner layer is the 30-60 minute time zone. Due to the overall size of the watch, although the 6 o'clock position is also a three-layered polymer type timing, the reading number can still be clear, and the 5980 needs to be distinguished by different colors and inner and outer layers according to the demand priority.We also offer replica Patek Philippe Grand Complications watches with high quality for sale.
No comments:
Post a Comment